October 2018 - goofycaca

How many of these will my procrastination kill off?

So here’s a long list of places I want to go for next con season; Katsucon, Emerald City Comic Con, Awesome Con, All Star Comic Con, Blerd Con, Otakon, Baltimore Comic Con, New York Comic Con, and Boston Comic Con. So some of these I already know I’m going to. Some are cons that I’m heavily leaning towards. And one is just because I want to post a goofy picture.

And here’s a list of costumes that I need to work on; Update Western Wonder, embellish and repair Yang, rework DARPA Poison Oak, water walking Leonardo Da Vinci from Ever After, Old Man Logan/Yang mashup (with working claws), All American Boy, John Crichton (Farscape/Crackers Don’t Matter), and YoRHa No.2 Type B from Nier: Automata (which I’ve never played). No problem, right?

The repair work for Western Wonder and Yang are pretty straight forward. The cowboy boots are cracked and need to be repainted. This is only noticeable up close. I am thinking of making boot covers instead. Since I need to learn how anyways. If I cannibalize the shirt I have now I think it will provide enough fabric for both boots. The bonus to this is that the boot colors will match the new shirt (I bought 2 of the same shirt when I made the costume).

The next step would be making a new shirt for Western Wonder. Again, the defects are really only noticeable up close. Small bits of fraying and fabric glue. A LOT of wrinkling. I am hoping the new fabric will hold up a little better than what I originally used. Sure it held up extremely well, but the new fabric may be more “wrinkle free” than the thin stuff.

Yang repairs will be a little trickier. The gauntlets sustained pretty significant damage for only 2 days wear. Of course, it was 2 days at NYCC. I’m experimenting with sprays to cover the paint for protection but without sacrificing shine. The rattle cans I purchased have been problematic so far, with one being a flat out failure. I want to try one more before looking into purchasing airbrushing equipment.

The embellishments that I have in mind for Yang sounds pretty easy. Extra detailing on the vest and some edges around the panels. However, the more I think about it the less simple the detailing becomes. Mostly because I’ve already finished the vest and the detailing is being added last. (And I just thought of adding Yang’s emblem to the back of the vest in the same color fabric.)

For my DARPA Poison Oak I want to take the streamers of leaves apart and sew them directly onto the BDU’s. I think this will make it look more like the original character and add additional durability to everything.

At least I’m half way through growing my beard for Da Vinci. I’m REALLY not a fan of having it this long. I get up in the morning and have to brush the hair out of my eyes. Go ahead and read that again, I’ll wait. The costume itself looks pretty simple. A brown robe, some long johns, a white cap, and water walking boots. See, simple. I can draw from BHCosplay’s experience with building the boots for his Red Legion costume here. He also recommended making them removable so that they can be carried if there’s a long distance to travel.

John Crichton and All American Boy are exactly what they sound like. Some prop building for Crichton and a lot of sewing for All American Boy. YoRHa No.2 Type B (2B for short) should be a quick build. Gender swapping it will be easy but may require some rethinking to keep it from looking like other characters in the game. Bonus, I now have an excuse to play the game.

Old Man Yang is the costume that I am, currently, most motivated to work on. Just thinking about the mechanism for getting the claws to extend and retract has taken up a lot of time. I’ve been looking into Arduino controllers and motors as well. I even picked up some straws and kabob skewers to start prototyping. Most of the rail systems I’ve seen online are, either, entirely too large or crazy expensive. I only need it to do 2 things. Move forward, then move back. I don’t even want it to move quickly. I like the idea that the claws move slowly, you know, as if they’re old. I figured I could build a rail system just using pieces of straw on wooden dowels. Three claws are attacked to pieces of straw, they are stabilized at the back end, and moved forward as a single unit. I’ll make the claws out of foam to keep them light so it should not require a very powerful motor. The trick, however, is that the motor has to move in both directions, several inches. At work I deal with motors from time to time but they’ve already been engineered into the products. I just change them and make sure they work. In this case, I have to figure out the entire system from start to finish.

I could add notes about my Steam Punk Poison Oak but I’ve stalled on that one pretty solidly. I am also toying with a gender swap Winter Schnee, also from RWBY. Then there’s Shego and any number of other characters to swap. But the fun one that I really want to cosplay isn’t even a character. I want to go to Boston Comic Con so I can cosplay this building!

JP Patches WIP dump

Since JP Patches was the subject of my post 2 years ago, I may as well follow up on that. I did complete a JP Patches cosplay for Emerald City Comic Con. I didn’t do the post apocalyptic version however. I had waited and procrastinated long enough and wanted to go ahead and finish it to wear at ECCC. Here is how it turned out;

Naturally there were several things that were easily done and others that took substantially more work. The Patches Pals patch was purchased and ironed onto a basic fishing hat that I also purchased. Other patches were purchased specifically or sent from interested parties. Darigold was happy to send me several patches to include on the jacket. The fire department patch was purchased from a reseller/collector website. Many of the other patches were items from games and the like that I had received over the years.

The fabric remnants as “patches” are pretty self explanatory. That is where the character got his name. Instead of just random patterns, many of the patches that I made came from geek oriented fabrics. My Little Pony, Spider-Man, Star Wars, etc. While I wanted to remain true to the spirit of JP Patches, I also wanted to give a nod to the comic book culture I was going to be surrounded by.

The buttons on the hat included one for Emerald City Comic Con, as well as, one for my own cosplay page. The others were generic motivation and “feel good” buttons. The buttons on the jacket were a different story. JP Patches didn’t wear a specific set of buttons or even keep any certain buttons for long. He rotated them out as he received them from fans, friends, or picked them up through out the days. Because of this I could have done the same, or even followed the same path as the fabric swatches. Instead, I made buttons specifically with images and tributes tied directly to the show. Many were black and white stills, pics of JP Patches with Gertrude, an pics of Chris following the show making appearances as JP Patches.

At this point the amount of work greatly increased. The shoes were simple, just drawing lines on some Converse All-Stars. The vest was just a basic geek vest that I had hanging in the closet. The gloves were purchased, along with the pants and shirt. The ears, makeup, and nose were all found on ClownAntics.com. Unfortunately the nose wasn’t perfect, but it was the best that I could find online. The ears were perfect. The makeup was more difficult than I had expected. The jacket required significant work. I took a jacket pattern and changed some of the panels to give the more linear lapel. Sadly, I’m not as great a sewer as I’d like to think and the sleeves an amazing amount of subterfuge to conceal. Thankfully, he’s called JP Patches for a reason.

After a few youtube tutorials the makeup did come out much brighter and defined. I do, however, wish I had done more than a single makeup test. It is harder than it looks. Also, make sure that all of your equipment works as expected. The pencil sharpener that came with the black makeup pencil, not big enough. Caused a medium size panic attack the day I wore the costume.

The wig is another item that caused more than a little trepidation. I wasn’t sure what to do with it once I got it and even toyed with the idea of not wearing it at all. Shortly before the con, I was saved by the graciousness of my best friends wife, who styled the wig for me. The morning of the reveal I went through the motions of getting dressed and putting on the makeup and the further along I got, the less hopeful I got. Until I put on the wig and hat. I can honestly say that I was surprised at how much the wig pulled the entire look together.

The reactions that I received at the con were spectacular! It was a fantastic day fun and, nearly, tears. I purchased 50 small rubber chickens to pass out to people that took my pic and they were gone by noon. Considering that I didn’t even make it to the con floor until about 10:30, that’s pretty impressive. The only problems that I had was a popped seam when I put on the jacket. And about 8 hrs into wearing the nose, it made a break for it. Reattached it with more spirit gum and it was good for several more hours.

I’d like to thank Erynne for her help with the wig. ClownAntics for their fantastic supply and support with the noses when I purchased ones that wouldn’t work and they gladly exchanged them. A very sincere thanks to Archie McPhee for stocking those hard to find items and curiosities that you can’t find anywhere else. My deepest thanks to JPPatches.com for their help and advise on how to proceed. Another to Darigold for sending me authentic patches to include on the jacket.

Most of all, Thank You Chris Wedes, for creating somebody so special. You’ve touched lives beyond measure and we’ll never forget.

Color me chartreuse and pee on the back of my head. It’s an update!

It’s been a while. To say the least. I believe somewhere down the line I did mention that I’m lazy. My lack of posts proves that.

I’m, hopefully, going to pick up a bit more on the writing here. Probably not in the same vein that I was originally. There will still be the cosplay posts. But instead of tutorial type posts, more blogs about con life. If you’ve read any of my posts it doesn’t come as a surprise that I tend to run at the mouth. So why not put that to good use?

Blogging is something that I’m pretty good at. Not in the I’m Going to Find Some Weird Story and Break it on the Internet. More along the lines of, Here’s My Life, Take it or Leave it.

On of the things that I have always wanted to do, since I got started in cosplay, is to cozy up to famous cosplayers and get more intimate details out of them about their lives. Not information like what their measurements are. I mean real information that will help their fans connect to them, get a real idea of what the lifestyle is like, and show them as human beings.

I’ve spent years working my way past the obvious stereotypes. I’m old enough to be most of their dads. Automatically creepy. I’m a guy. Automatically creepy, possibly dangerous. Stereotypes that, all too often, prove true. These days I’ve built enough of a relationship with many of them that I can approach them and not make them feel cornered. They can relax and be comfortable knowing that I’m not going to do anything to send them running. In fact, I know them well enough now that I can start asking them for interviews. BECAUSE they know I’m not going to ask about their measurements or home addresses.

While that is a huge part of the direction I want to go, there are other considerations. HOW do I want to present the information? Live feeds, podcasts, youtube, transcripts? What format works best for me, for them, and for the fans?

I’m not looking to get this figured out tonight or this weekend. Just something to start shaping and directing in the near future. Emerald City Comic Con is in March and, fingers crossed, I’ll do my first set of interviews there. With a possible panel at the show, 2 new costumes, and 2 reworked costumes, ECCC could be a big one for me.

Let’s see where this goes.